...

In the Options Tab ensure that POS Lookup is selected.

Self Printed Barcodes not scanning

Barcodes can be adjusted to suit the particular printer. If the barcode looks OK but won't scan then make adjustments in the Printer Setup.

Printing

Highlight 'Price Stickers' then click Advanced

• If the barcodes are to thin then untick Thin Barcodes

• If the barcodes are to thick then tick Thin barcodes

To test a barcode

After switching, duplicate a receipt and scan the barcode to see if OK.

Note: This also does the setting for the POS price labels so if these are being printed on a different type of printer then this may cause problems. So print a few shop labels as well and test those too.

Faulty Barcode Scanner

Try scanning the label on another computer. If it works then it may be that your scanner is faulty.

Printer Issues

This could be the result of damage to the printer thermal head. In this case some labels will scan okay, and others will struggle.

A barcode will scan in Orders but not in a sales screen

The sales screen is only set to look for barcodes that are stored in the Barcode field of a stock card, or in the PLU field. It may be that you are attempting to scan the supplier part-code. If you need to be able to scan this in sales, you will need to add it as a barcode in the stock card.

Some machines will scan and some not

The dispensary slave computer may be set to print thin barcodes, and the master is correctly set for thick, so almost all of the barcodes from that slave will fail. Solution is to set the slave to thick barcodes as well.